JRC JMA-5312-6 - Page 411

9.1 Fault Finding
y
yyyy
yyyy
Table 9-5 List of Route Error Messages and Warnings
Message Class Description
ALR
No.
Approach Alarm Approach the route.
Arrival Alarm Arrive at way point.
Break Off (WPT) Alarm Out of the way point.
Cross Track Error Alarm Go off the route.
ALR No : Unique alarm number in ALR sentence and ACK sentence.
Table 9-6 List of Operational Error Messages and Warnings
Message
Class
Description
ALR
No.
Can’t Transmit
INFO
Tried to transmit within 5 second after standby or when the
transmitter-receiver has any trouble.
Card Full
INFO
Card : Run out of free space.
Copy Failed
INFO
Card : Copy failure.
Delete failed
INFO
Card : Deletion failure.
Format Card
INFO
Card : Unformatted card.
Format Failed
INFO
Card : Format failure.
Invalid Card
INFO
Card : Invalid card.
Invalid Connection
INFO
The operator set performance monitor to on without selecting
straight.
Invalid Data
INFO
Tried to enter any data beyond its range.
Invalid Range INFO
TM selection due to TM-disabled range (96 nm).
Zooming in a ZOOM-disabled range (0.125 nm).
MAX Point
INFO
Tried to enter navigation information beyond the specified.
No Card
INFO
Card not detected yet.
No Position Data
INFO
Mark or line input when the latitude and longitude is invalid.
No Heading Data
INFO
Target tracking operation or TM selection when bearing data is
invalid.
No Object
INFO
No object at the cursor-specified position.
Not Allowed
INFO
General operation error.
Out of Range
INFO
Out of operation range.
Read Failed
INFO
Card : Read failure.
Slave Mode
INFO
Operation of a menu for the scanner unit when the slave mode is
active.
Write Failed
INFO
Card : Write failure.
9
ALR No : Unique alarm number in ALR sentence and ACK sentence.
9-4