163
08.11 EN
Adding engine oil
Procedure
• Add fresh engine oil through the filler
port (164) in accordance with the
consumables table.
• Check the engine oil level with the
dipstick (163) and top up if
necessary, (see "Consumables" on
page 151).
• Screw the filler cap back on.
• Attach the floor plate.
NOTE
The incorrect amount of oil will
damage the engine.
XAfter replacing the oil and oil filter carry
out a test run and check the oil
pressure display (82).
XCheck that the oil drain plug and oil
filter housing are tight.
170
169
171
82
To Next Page
Loading...
Need help?
General
