What to do if my Juniper Switch has excessive component temperature?
If your Juniper Switch components are overheating, make sure the switch has enough ventilation and that there are no obstructions blocking airflow.
What to do if a Juniper Switch has a media failure?
If your Juniper Switch is experiencing a media failure, inspect the media connections and replace any faulty cables.
General| Throughput | 77 Mpps |
|---|---|
| MAC address table | 8000 entries |
| Jumbo frames support | Yes |
| Number of VLANs | 1024 |
| Networking standards | - |
| Switch type | Managed |
| SFP module slots quantity | 4 |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Stackable | No |
| Product color | Black |
| Power consumption (typical) | 100 W |
| Operating altitude | 0 - 3048 m |
| Non-operating altitude | 0 - 4877 m |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 45 °C |
| Storage relative humidity (H-H) | 0 - 95 % |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Depth | 254 mm |
|---|---|
| Width | 441 mm |
| Height | 43 mm |
| Weight | 3600 g |
To Next Page
