Juniper EX2200 Complete Hardware Guide

• Multiple Power Supplies Disconnection Warning for EX Series Switches
In Case of Electrical Accident: Action to Take on an EX Series Switch
This topic applies to hardware devices in the EX Series product family, which includes
switches and the XRE200 External Routing Engine.
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the device.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
Related
Documentation
• General Safety Guidelines and Warnings for EX Series Switches on page 113
• General Electrical Safety Guidelines and Warnings for EX Series Switches on page 141
• AC Power Electrical Safety Guidelines for EX Series Switches on page 144
• DC Power Electrical Safety Guidelines for EX Series Switches
147Copyright © 2010, Juniper Networks, Inc.
Chapter 18: Power and Electrical Safety Information

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g