EasyManuals Logo

Juniper EX2200 Complete Hardware Guide

Juniper EX2200
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
CHAPTER 8
Installing the Switch
Installing and Connecting an EX2200 Switch on page 51
Unpacking an EX2200 Switch on page 52
Mounting an EX2200 Switch on page 53
Mounting an EX2200 Switch on a Desk or Other Level Surface on page 54
Mounting an EX2200 Switch on Two Posts in a Rack or Cabinet on page 55
Mounting an EX2200 Switch on Four Posts in a Rack or Cabinet on page 57
Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet on page 61
Mounting an EX2200 Switch on a Wall on page 61
Installing and Connecting an EX2200 Switch
To install and connect the EX2200 switch:
1. Follow instructions in “Unpacking an EX2200 Switch” on page 52.
2. Mount the switch by following instructions appropriate for your site:
“Mounting an EX2200 Switch on Two Posts in a Rack or Cabinet” on page 55 (using
the mounting brackets provided)
“Mounting an EX2200 Switch on Four Posts in a Rack or Cabinet” on page 57 (using
the separately orderable four-post rack-mount kit)
“Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet” on page 61
(using the 2-in.-recess front brackets from the separately orderable four-post
rack-mount kit)
“Mounting an EX2200 Switch on a Desk or Other Level Surface” on page 54 (using
the rubber feet provided)
“Mounting an EX2200 Switch on a Wall on page 61 (using the separately orderable
wall-mount kit)
3. Follow instructions in “Connecting Earth Ground to an EX Series Switch” on page 67.
4. Follow instructions in “Connecting AC Power to an EX2200 Switch” on page 73.
51Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Other manuals for Juniper EX2200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX2200 and is the answer not in the manual?

Juniper EX2200 Specifications

General IconGeneral
Throughput77 Mpps
MAC address table8000 entries
Jumbo frames supportYes
Number of VLANs1024
Networking standards-
Switch typeManaged
SFP module slots quantity4
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports quantity48
StackableNo
Product colorBlack
Power consumption (typical)100 W
Operating altitude0 - 3048 m
Non-operating altitude0 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth254 mm
Width441 mm
Height43 mm
Weight3600 g

Related product manuals