EasyManuals Logo

Juniper EX2200 Complete Hardware Guide

Juniper EX2200
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Power over Ethernet (PoE) Ports
PoE ports provide electrical current to devices through the network cables so that separate
power cords for devices such as IP phones, wireless access points, and security cameras
are unnecessary. EX2200 switches are available with full (all 24 or 48 built-in network
ports) or no PoE capability. Full PoE models are primarily used in IP telephony
environments.
EX2200 switches running Junos OS Release 10.3 or later can supply up to 30 W to
individual PoE ports, supporting powered devices that comply with IEEE 802.3af (PoE)
and IEEE 802.3at (PoE+).
NOTE: IEEE 802.3at class 4 powered devices require category 5 or higher
Ethernet cables.
EX2200 switches running Junos OS Release 10.2 or earlier can supply up to 15.4 W to
individual PoE ports, supporting powered devices that comply with IEEE 802.3af (PoE).
Related
Documentation
EX2200 Switch Models on page 4
Site Preparation Checklist for EX2200 Switches on page 33
EX2200 Switch Models
The EX2200 switch is available with 24 or 48 built-in network ports with full (all 24 or
48 built-in network ports) or no Power over Ethernet (PoE) capability. Table 1 on page 4
lists the EX2200 switch models.
Table 1: EX2200 Switch Models
Maximum PoE Power
AvailablePorts in Which PoE Is AvailableAccess PortsModel
24 Gigabit EthernetEX2200-24T-4G
405 WAll 24 ports24 Gigabit EthernetEX2200-24P-4G
48 Gigabit EthernetEX2200-48T-4G
405 WAll 48 ports48 Gigabit EthernetEX2200-48P-4G
Related
Documentation
Front Panel of an EX2200 Switch on page 5
EX2200 Switches Hardware Overview on page 3
Copyright © 2010, Juniper Networks, Inc.4
Complete Hardware Guide for EX2200 Ethernet Switches

Table of Contents

Other manuals for Juniper EX2200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX2200 and is the answer not in the manual?

Juniper EX2200 Specifications

General IconGeneral
Throughput77 Mpps
MAC address table8000 entries
Jumbo frames supportYes
Number of VLANs1024
Networking standards-
Switch typeManaged
SFP module slots quantity4
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports quantity48
StackableNo
Product colorBlack
Power consumption (typical)100 W
Operating altitude0 - 3048 m
Non-operating altitude0 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth254 mm
Width441 mm
Height43 mm
Weight3600 g

Related product manuals