Juniper EX2200 Complete Hardware Guide

You can contact JTAC 24 hours a day, seven days a week on the Web or by telephone:
•
Case Manager at CSC: http://www.juniper.net/cm/
•
Telephone: +1-888-314-JTAC1-888-314-5822, toll free in U.S., Canada, and Mexico
NOTE: For international or direct-dial options in countries without toll free
numbers, see http://www.juniper.net/support/requesting-support.html.
If you are contacting JTAC by telephone, enter your 11-digit case number followed by the
pound (#) key for an existing case, or press the star (*) key to be routed to the next
available support engineer.
The support representative validates your request and issues an RMA number for return
of the component.
Related
Documentation
Packing an EX2200 Switch or Component for Shipping on page 108•
• Packing an EX3200 Switch or Component for Shipping
• Packing an EX4200 Switch or Component for Shipping
• Packing an EX4500 Switch or Component for Shipping
• Packing an EX8200 Switch or Component
• Packing an XRE200 External Routing Engine or Component for Shipping
• Returning an EX2200 Switch or Component for Repair or Replacement on page 105
• Returning an EX3200 Switch or Component for Repair or Replacement
• Returning an EX4200 Switch or Component for Repair or Replacement
• Returning an EX4500 Switch or Component for Repair or Replacement
• Returning an EX8200 Switch or Component for Repair or Replacement
• Returning an XRE200 External Routing Engine for Repair or Replacement
Packing an EX2200 Switch or Component for Shipping
If you are returning an EX2200 switch or component to Juniper Networks for repair or
replacement, pack the item as described in this topic.
Before you begin, ensure that you have retrieved the original shipping carton and packing
materials. Contact your JTAC representative if you do not have these materials, to learn
about approved packing materials. See “Contacting Customer Support to Obtain Return
Materials Authorization for EX Series Switches” on page 107.
Ensure that you have the following parts and tools available:
•
Antistatic bag, one for each switch or component
•
Phillips (+) screwdriver, number 2
Copyright © 2010, Juniper Networks, Inc.108
Complete Hardware Guide for EX2200 Ethernet Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g