Juniper EX2200 Complete Hardware Guide

Figure 38: Location of the Serial Number ID Label on EX2200 Switches
g027011
SN: CT0209520001
Serial number ID label
EX2200-24-4G REV: X1
750-026464 REV: X3
MAC: 00:23:9C:oE:19:00
Mfg. Date
20090227
MADE IN CHINA
Related
Documentation
Contacting Customer Support to Obtain Return Materials Authorization for EX Series
Switches on page 107
•
• Returning an EX2200 Switch or Component for Repair or Replacement on page 105
Contacting Customer Support to Obtain Return Materials Authorization for EX Series
Switches
If you are returning a switch or hardware component to Juniper Networks for repair or
replacement, obtain a Return Materials Authorization (RMA) from Juniper Networks
Technical Assistance Center (JTAC).
After locating the serial number of the switch or hardware component you want to return,
open a Case with Juniper Networks Technical Assistance Center (JTAC) on the Web or
by telephone.
For instructions on locating the serial number of the switch or hardware component you
want to return:
•
See “Locating the Serial Number on an EX2200 Switch or Component” on page 106.
•
See Locating the Serial Number on an EX3200 Switch or Component.
•
See Locating the Serial Number on an EX4200 Switch or Component.
•
See Locating the Serial Number on an EX4500 Switch or Component.
•
See Locating the Serial Number on an EX8200 Switch or Component.
•
See Locating the Serial Number on an XRE200 External Routing Engine or Component.
Before you request an RMA from JTAC, be prepared to provide the following information:
•
Your existing case number, if you have one
•
Serial number of the component
•
Your name, organization name, telephone number, fax number, and shipping address
•
Details of the failure or problem
•
Type of activity being performed on the switch when the problem occurred
•
Configuration data displayed by one or more show commands
107Copyright © 2010, Juniper Networks, Inc.
Chapter 14: Returning the Switch or Switch Components

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g