EasyManuals Logo

Juniper EX2200 Complete Hardware Guide

Juniper EX2200
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
CHAPTER 1
EX2200 Switch Overview
EX2200 Switches Hardware Overview on page 3
EX2200 Switch Models on page 4
Chassis Physical Specifications for EX2200 Switches on page 5
Front Panel of an EX2200 Switch on page 5
Rear Panel of an EX2200 Switch on page 6
EX2200 Switch Hardware and CLI Terminology Mapping on page 7
EX2200 Switches Hardware Overview
Juniper Networks EX Series Ethernet Switches provide scalable connectivity for the
enterprise market, including branch offices, campus locations, and data centers. The
switches run under the Juniper Networks Junos operating system (Junos OS), which
provides Layer 2 and Layer 3 switching, routing, and security services. The same Junos
OS code base that runs on EX Series switches also runs on all Juniper Networks J Series,
M Series, MX Series, and T Series routers.
EX2200 Switches on page 3
Uplink Ports on page 3
Power over Ethernet (PoE) Ports on page 4
EX2200 Switches
Juniper Networks EX2200 Ethernet switches provide connectivity for low-density
environments.
EX2200 switches are available in models with either 24 or 48 built-in network ports and
four uplink ports, with Power over Ethernet (PoE) either available in all built-in network
ports or not available in any built-in network port. All models provide network ports that
have 10/100/1000Base-T Gigabit Ethernet connectors and four uplink ports. These
switches run under Junos OS for EX Series switches.
Uplink Ports
Each EX2200 switch has four uplink ports that support 1-gigabit small form-factor
pluggable (SFP) transceivers for use with fiber connections and copper connections.
See “Optical Interface Support in EX2200 Switches” on page 22.
3Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Other manuals for Juniper EX2200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX2200 and is the answer not in the manual?

Juniper EX2200 Specifications

General IconGeneral
Throughput77 Mpps
MAC address table8000 entries
Jumbo frames supportYes
Number of VLANs1024
Networking standards-
Switch typeManaged
SFP module slots quantity4
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports quantity48
StackableNo
Product colorBlack
Power consumption (typical)100 W
Operating altitude0 - 3048 m
Non-operating altitude0 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth254 mm
Width441 mm
Height43 mm
Weight3600 g

Related product manuals