Juniper NFX250 - Show System Visibility Jcp; Table 13: Show System Visibility Jcp Output Fields

show system visibility jcp
Syntax show system visibility jcp
Release Information Command introduced in Junos OS Release 15.1X53-D40 for the NFX250 Network Services
Platform.
Description Display details such as CPU statistics, memory usage, internal IP address, list of network
interfaces, interface statistics, and the list of disks for Junos VM.
Required Privilege
Level
view
Related
Documentation
show system visibility cpu on page 74•
• show system visibility host on page 77
• show system visibility jdm on page 85
• show system visibility memory on page 89
• show system visibility network on page 91
• show system visibility storage on page 94
• show system visibility vnf on page 97
List of Sample Output show system visibility jcp on page 83
Output Fields Table 13 on page 82 lists the output fields for the show system visibility jcp command.
Output fields are listed in the approximate order in which they appear.
Table 13: show system visibility jcp Output Fields
Field DescriptionField Name
Fields for JCP CPU Statistics
The total CPU time, in seconds.CPU Time
The total system time, in seconds.System Time
The total user time, in seconds.User Time
Fields for JCP Memory Usage
The maximum amount of memory, in kibibytes (KiBs).Maximum Memory
The total amount of used memory, in kibibytes (KiBs).Used Memory
Fields for JCP Internal IP Addresses
The name of the interface.Interface
Copyright © 2017, Juniper Networks, Inc.82
JDM User Guide for NFX250 Network Services Platform