Juniper NFX250 - Ipsec-Nm

Related
Documentation
• Understanding Virtual Network Functions on page 105
• Managing the VNF Life Cycle on page 106
• show virtual-network-functions on page 145
ipsec-nm
Syntax ipsec-nm {
interfaces {
heth1 | heth2 {
mapping {
vlan {
members vlan-name;
}
}
}
}
}
Hierarchy Level [edit virtual-network-functions]
Release Information Statement introduced in Junos OS Release 15.1X53-D45 for the NFX250 Network Services
Platform.
Description An option that enables or disables the ipsec virtual network function if the ipsec-nm
option is configured in the system.
Options interfaces—Name of the interface. For example, heth1 and heth2
vlan members vlan-name—Name of the VLAN members.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Understanding Virtual Network Functions on page 105
• Managing the VNF Life Cycle on page 106
• show virtual-network-functions on page 145
Copyright © 2017, Juniper Networks, Inc.130
JDM User Guide for NFX250 Network Services Platform