show system services ipsec-nm
Syntax show system services ipsec-nm
Release Information Command introduced in Junos OS Release 15.1X53-D40 for the NFX250 Network Services
Platform.
Description Display details such as status and mode of an ipsec-nm docker container for a
disaggregated Junos OS platform.
Required Privilege
Level
view
Related
Documentation
show system visibility host on page 77•
• show system visibility jcp on page 82
• show system visibility jdm on page 85
• show system visibility memory on page 89
• show system visibility network on page 91
• show system visibility storage on page 94
• show system visibility vnf on page 97
List of Sample Output show system services ipsec-nm on page 72
Output Fields Table 10 on page 72 lists the output fields for the show system services ipsec-nm
command. Output fields are listed in the approximate order in which they appear.
Table 10: show system services ipsec-nm Output Fields
Field DescriptionField Name
IPSec-NM Docker-Container Information
The mode of the ipsec-nm docker container. Possible values are Enabled and Disabled.Mode
The status of the ipsec-nm docker container. Possible values are Running and Not
Running.
Status
Sample Output
show system services ipsec-nm
user@jdm> show system services ipsec-nm
IPSec-NM Docker-Container Information
-------------------------------------
Mode: Enabled
Status: Running
Copyright © 2017, Juniper Networks, Inc.72
JDM User Guide for NFX250 Network Services Platform
To Next Page
Loading...
Need help?
General
