NOTE: Ensure that you reboot the system after enabling or disabling the
ipsec-nm mode for the changes to take effect.
Related
Documentation
Understanding Disaggregated Junos OS on page 3•
Viewing and Managing Centralized Log Files in a Disaggregated Junos OS Platform
On a disaggregated Junos OS platform, a centralized logging server collects all system
logs for all computing entities in the disaggregated Junos OS. Centralized logging simplifies
device management by allowing users to view all log files for all disaggregation Junos
entities in a single place.
This topic describes:
•
Enabling Centralized Logging on page 42
•
Viewing Log Messages on page 42
Enabling Centralized Logging
You can enable centralized logging on vSRX to view the log files on JDM.
1. Log in to vSRX:
root@jdm> ssh vsrx-hostname
2. Ensure that the fxp0 interface is assigned the management IP address:
root>show interfaces fxp0 terse
3. Assign a hostname to the vSRX instance:
root# set system host-name hostname
4. To specify JDM as the host for the central log file:
root# set system syslog host 192.168.1.254 any any
192.168.1.254 is the internal management IP address of JDM
You can specify filters for the messages that you want displayed. If you specify any
any all the messages will be logged.
Viewing Log Messages
To view system log messages logged by VNFs and the system generated logs on JDM,
use the command:
user@jdm> show log syslog
Copyright © 2017, Juniper Networks, Inc.42
JDM User Guide for NFX250 Network Services Platform
To Next Page
Loading...
