show security ipsec statistics
Syntax show security ipsec statistics
Release Information Command introduced in Junos OS Release 15.1X53-D47 for the NFX250 Network Services
Platform.
Description Display IPSec statistics.
Required Privilege
Level
view
Related
Documentation
ipsec on page 194•
List of Sample Output show security ipsec statistics on page 209
Output Fields Table 30 on page 208 lists the output fields for the show security ipsec statistics command.
Output fields are listed in the approximate order in which they appear.
Table 30: show security ipsec statistics
Field DescriptionField Name
ESP Statistics
Total number of bytes encrypted by the local system across the IPSec tunnel.Encrypted bytes
Total number of bytes decrypted by the local system across the IPSec tunnel.Decrypted bytes
Total number of packets encrypted by the local system across the IPSec tunnel.Encrypted packets
Total number of packets decrypted by the local system across the IPSec tunnel.Decrypted packets
AH Statistics
Total number of bytes received by the local system across the IPSec tunnel.Input bytes
Total number of bytes transmitted by the local system across the IPSec tunnel.Output bytes
Total number of packets received by the local system across the IPSec tunnel.Input packets
Total number of packets transmitted by the local system across the IPSec tunnel.Output packets
Errors
Total number of authentication header (AH) failures. An AH failure occurs when there
is a mismatch of the authentication header in a packet transmitted across an IPSec
tunnel.
AH authentication failures
Copyright © 2017, Juniper Networks, Inc.208
JDM User Guide for NFX250 Network Services Platform
To Next Page
Loading...
