Juniper NFX250 - Interfaces

interfaces
Syntax interfaces interface-name {
pci-address pci-address;
mac-address mac-address;
mtu size;
mapping {
hsxe0 {
virtual-function {
vlan-id vlan-id;
}
}
hsxe1 {
virtual-function {
vlan-id vlan-id;
}
}
vlan {
members vlan-name;
mode [access | trunk];
native-vlan-id vlan-id;
}
}
}
Hierarchy Level [edit virtual-network-functions]
Release Information Statement introduced in Junos OS Release 15.1X53-D50 for the NFX250 Network Services
Platform.
Description Configure Virtual Network Functions (VNF) interfaces on platforms running disaggregated
Junos OS.
Options interface-name—Name of the VNF interfaces.
mac-address—MAC address of the VNF interfaces.
mtu—Maximum transfer unit (MTU) size of packets in bytes.
pci-address—Target PCI address of the VNF interfaces.
vlan-id—SR-IOV virtual function to use to attach a VNF to a physical interface.
vlan members—Membership for this interface.
native-vlan-id—Virtual LAN identifier for untagged frames. For example, 1...4095
vlan-name—Name of the VLAN members.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
129Copyright © 2017, Juniper Networks, Inc.
Chapter 6: Virtual Network Functions Configuration Statements and Operational Commands