show connections
Syntax show connections
Release Information Command introduced in Junos OS Release 15.1X53-D47 for the NFX250 Network Services
Platform.
Description Displays information such as network connection, function, interface name, and the
connection status for the following types of cross-connect:
• Unconditional cross-connect
• Cross-connect based on the VLAN
• Cross connect with operations such as PUSH, POP, and SWAP on a VLAN tag
• Cross connect of native VLAN traffic
Required Privilege
Level
view
Related
Documentation
cross-connect on page 122•
List of Sample Output show connections on page 57
Output Fields Table 3 on page 57 lists the output fields for the show connections command. Output
fields are listed in the approximate order in which they appear.
Table 3: show connections Output Fields
Field DescriptionField Name
Displays the type of the cross-connect.Connection
Displays the name of the virtual network function.Function
Specifies an interface on which the connection is established.Interface
Displays the status of the connection.Status
Sample Output
show connections
user@jdm> show connections
Connection Function Interface Vlan Status
--------------------------------------------------------------------------------
phy_cc system hsxe0 200 up
centos1 eth2 500
57Copyright © 2017, Juniper Networks, Inc.
Chapter 4: Management Configuration Statements and Operational Commands
To Next Page
Loading...
