Juniper NFX250 - Configuring HTTP Access to the Disaggregated Junos os Platform; Configuring HTTPS Access to the Disaggregated Junos os Platform

The configured port only accepts NETCONG-over-SSH connections. Regular SSH
connections to the port are ignored.
Related
Documentation
Understanding the JDM CLI on page 28•
• Accessing the JDM Shell, JDM CLI, and JCP Prompts in a Disaggregated Junos OS
Platform on page 28
Configuring HTTP Access to the Disaggregated Junos OS Platform
You can configure HTTP access to the disaggregated Junos OS platform.
To do so:
1. Access the system services HTTP configuration:
[edit]
user@jdm#edit system services http
2. Set the HTTP port for incoming connections:
[edit system services http]
user@jdm# set port port
Related
Documentation
Configuring HTTPS Access to the Disaggregated Junos OS Platform on page 38•
• Understanding the JDM CLI on page 28
• Accessing the JDM Shell, JDM CLI, and JCP Prompts in a Disaggregated Junos OS
Platform on page 28
Configuring HTTPS Access to the Disaggregated Junos OS Platform
You can configure HTTPS access to the disaggregated Junos OS platform.
To do so:
1. Access the HTTPS configuration:
[edit]
user@jdm#edit system services https
2. Set the HTTPS port for incoming connections:
[edit system services https]
user@jdm# set port port-number
Related
Documentation
Configuring HTTP Access to the Disaggregated Junos OS Platform on page 38•
• Understanding the JDM CLI on page 28
Copyright © 2017, Juniper Networks, Inc.38
JDM User Guide for NFX250 Network Services Platform