Juniper NFX250 - Show Security Ike Active-Peer; Table 27: Show Security Ike Active-Peer Output Fields

show security ike active-peer
Syntax show security ike active-peer
Release Information Command introduced in Junos OS Release 15.1X53-D47 for the NFX250 Network Services
Platform.
Description Display information about IKE active peers.
Required Privilege
Level
view
Related
Documentation
ike on page 192•
List of Sample Output show security ike active-peer on page 203
Output Fields Table 27 on page 203 lists the output fields for the show security ike active-peer command.
Output fields are listed in the approximate order in which they appear.
Table 27: show security ike active-peer Output Fields
Field DescriptionField Name
Address of the remote peer.Remote Address
Network post assigned to the IKE active peer.Port
ID of the IKE peer.Peer IKE-ID
Authentication, Authorization, and Accounting (AAA) username.AAA username
IP address assigned to the IKE active peer.Assigned IP
Sample Output
show security ike active-peer
user@jdm> show security ike active-peer
Remote Address Port Peer IKE-ID AAA username Assigned IP
2.2.2.2 500 2.2.2.2 not available 0.0.0.0
203Copyright © 2017, Juniper Networks, Inc.
Chapter 9: IPSec-NM Configuration Statements and Operational Commands