Juniper NFX250 - Managing Core Files for a Disaggregated Junos os Platform; Viewing Core Files

To view other log messages, use the command:
user@jdm> show log <filename>
NOTE: You cannot view JCP log files on JDM.
A log rotation process runs every 5 minutes. If the log file size is greater than
5 MB, then the log files get rotated. The log files are saved in the /var/log
directory.
Related
Documentation
Managing Core Files for a Disaggregated Junos OS Platform on page 43•
Managing Core Files for a Disaggregated Junos OS Platform
This topic discusses how to view core files for a disaggregated Junos OS platform.
It contains the following sections:
•
Viewing Core Files on page 43
Viewing Core Files
To view all core files from the JDM CLI, enter the show system core-dumps command:
/var/tmp/*core* :
drwxr-xr-x 2 root root 4096 Jan 17 19:01 corefiles
/var/crash/*core* :
-rw-r--r-- 1 root root 382853 Jan 1 00:54 jdm.jdmd.4899.1420073655.core.tgz
-rw-r--r-- 1 root root 372095 Jan 1 01:11 jdm.jdmd.5697.1420074677.core.tgz
-rw-r--r-- 1 root root 3141405 Jan 17 19:01 jdm.jdmd.6875.1421521308.core.tgz
-rw-r--r-- 1 root root 18440 Jan 17 14:24 jdm.test.19278.1421504682.core.tgz
To view all core files displayed in JDM, open the core files using Unix commands. The
core files are stored in the /var/tmp/corefiles/ directory on Hypervisor.
Related
Documentation
Viewing and Managing Centralized Log Files in a Disaggregated Junos OS Platform on
page 42
•
43Copyright © 2017, Juniper Networks, Inc.
Chapter 3: Management