Juniper NFX250 - Virtual-Cpu

virtual-cpu
Syntax virtual-cpu {
virtual-cpu-number {
physical-cpu number | range;
}
count number;
features {
hardware-virtualization;
}
}
Hierarchy Level [edit virtual-network-functions]
Release Information Statement introduced in Junos OS Release 15.1X53-D40 for the NFX250 Network Services
Platform.
Description Specify the number of virtual CPUs the VNF can use. By default, a VNF is assigned one
virtual CPU, which is independent of any specific physical CPU.
Options virtual-cpu count number—Number of virtual CPUs. For example, 2.
virtual-cpu features—Features of the virtual cpu. For example, hardware-virtualization.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Understanding Virtual Network Functions on page 105
• Managing the VNF Life Cycle on page 106
• show virtual-network-functions on page 145
Copyright © 2017, Juniper Networks, Inc.138
JDM User Guide for NFX250 Network Services Platform