Juniper NFX250 - Page 162

vlan-id vlan-id;
}
}
hsxe1 {
virtual-function {
vlan-id vlan-id;
}
}
vlan {
members vlan-name;
mode [access | trunk];
native-vlan-id vlan-id;
}
}
}
}
Hierarchy Level [edit virtual-network-functions]
Release Information Statement introduced in Junos OS Release 15.1X53-D45 for the NFX250 Network Services
Platform.
Description Name of the virtual network function.
Options interfaces—Name of the interface. For example, em1.
no-autostart—An option to disable auto-start of VNF on the VNF configuration commit.
pci-address—An option to specify PCI address for the VNF interfaces.
mapping—An option to map VNF interfaces on platforms running disaggregated Junos
OS.
virtual-cpu—An option to specify the number of virtual CPUs the VNF can use. By default,
a VNF is assigned one virtual CPU, which is independent of any specific physical CPU.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Understanding Virtual Network Functions on page 105
• Managing the VNF Life Cycle on page 106
• show virtual-network-functions on page 145
Copyright © 2017, Juniper Networks, Inc.144
JDM User Guide for NFX250 Network Services Platform