EasyManuals Logo

Juniper SRX340 Hardware Guide

Juniper SRX340
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
Related
Documentation
SRX340 Services Gateway General Safety Guidelines and Warnings on page 103
SRX340 Services Gateway Safety Requirements, Warnings, and Guidelines on page 104
Restricted Access Area Warning on page 104
Qualified Personnel Warning on page 106
Preventing Electrostatic Discharge Damage to the SRX340 Services Gateway on
page 107
SRX340 Services Gateway General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the services gateway from
damage. The list of guidelines might not address all potentially hazardous situations in
your working environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in these topics. Ensure that only
authorized service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip on them.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this guide. Such an action could cause severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Avoid spilling liquid onto the services gateway chassis or onto any services gateway
component. Such an action could cause electrical shock or damage the services
gateway.
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Related
Documentation
SRX340 Services Gateway Definition of Safety Warning Levels on page 101
SRX340 Services Gateway Safety Requirements, Warnings, and Guidelines on page 104
Restricted Access Area Warning on page 104
Qualified Personnel Warning on page 106
103Copyright © 2016, Juniper Networks, Inc.
Chapter 24: General Safety Guidelines and Warnings

Table of Contents

Other manuals for Juniper SRX340

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX340 and is the answer not in the manual?

Juniper SRX340 Specifications

General IconGeneral
Firewall Throughput3 Gbps
Maximum Concurrent Sessions256, 000
Memory4 GB
Redundant Power SuppliesNo
Operating Temperature32°F to 104°F (0°C to 40°C)
Humidity10% to 90% non-condensing
Storage8 GB

Related product manuals