Figure 9: Connecting the Grounding Cable to the SRX340 Services
Gateway
6. Dress the grounding cable and verify that it does not touch or block access to the
services gateway components and that it does not drape where people could trip on
it.
NOTE: The device should be permanently connected to ground during
operation.
Related
Documentation
• Required Tools and Parts for Grounding the SRX340 Services Gateway on page 53
• SRX340 Services Gateway Grounding Specifications on page 53
55Copyright © 2016, Juniper Networks, Inc.
Chapter 15: Connecting the SRX340 Services Gateway to Ground