Related
Documentation
Required Tools and Parts for Maintaining the SRX340 Services Gateway Hardware
Components on page 77
•
• Maintaining the SRX340 Services Gateway Cooling System Components on page 78
• Maintaining the SRX340 Services Gateway Power Supply on page 78
Maintaining the SRX340 Services Gateway Cooling System Components
The services gateway fan controller works to maintain an optimal temperature for the
services gateway. If the fan controller fails, the services gateway temperature will exceed
the maximum working temperature and it will fail. Make sure that you maintain the
recommended clearances behind the services gateway to enable the fan controller to
function optimally.
Related
Documentation
Required Tools and Parts for Maintaining the SRX340 Services Gateway Hardware
Components on page 77
•
• Routine Maintenance Procedures for the SRX340 Services Gateway on page 77
• Maintaining the SRX340 Services Gateway Power Supply on page 78
Maintaining the SRX340 Services Gateway Power Supply
To maintain the power supplies of the services gateway:
•
Make sure that all power cables are arranged so that they do not obstruct access to
other services gateway components.
•
Routinely check the POWER LED on the front panel. If this LED is solid green, the power
supplies are functioning normally.
•
Periodically inspect the site to ensure that the power cables connected to the services
gateway are securely in place and that there is no moisture accumulating near the
services gateway.
Related
Documentation
• Required Tools and Parts for Maintaining the SRX340 Services Gateway Hardware
Components on page 77
• Routine Maintenance Procedures for the SRX340 Services Gateway on page 77
• Maintaining the SRX340 Services Gateway Cooling System Components on page 78
Copyright © 2016, Juniper Networks, Inc.78
SRX340 Services Gateway Hardware Guide
To Next Page
Loading...
