disconnected from earth ground. For more information about ESD, see “Preventing
Electrostatic Discharge Damage to the SRX340 Services Gateway” on page 107.
3. On the console or other management device connected to the services gateway, enter
CLI operational mode and issue the following command to shut down the services
gateway software:
user@host> request system halt
Wait until a message appears on the console confirming that the operating system
has halted.
4. Shut down power to the services gateway by pressing the Power button on the front
of the services gateway.
5. Disconnect power from the services gateway.
6. Remove the cables that connect to all external devices.
7. If the device is installed on a wall or rack, have one person support the weight of the
device while another person unscrews and removes the mounting screws.
8. Place the services gateway in the shipping carton.
9. Cover the services gateway with an ESD bag, and place the packing foam on top of
and around the device.
10. Replace the accessory box on top of the packing foam.
11. Securely tape the box closed.
12. Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
Related
Documentation
Contacting Customer Support on page 91•
• Returning a SRX340 Services Gateway Component to Juniper Networks on page 92
• Locating the SRX340 Services Gateway Chassis Serial Number and Agency Labels on
page 93
• Locating the SRX340 Services Gateway Mini-Physical Interface Module Serial Number
Label on page 93
• Listing the SRX340 Services Gateway Component Details with the CLI on page 93
• Information You Might Need to Supply to JTAC on page 94
• Required Tools and Parts for Packing the SRX340 Services Gateway on page 95
• Packing SRX340 Services Gateway Components for Shipment on page 96
Packing SRX340 Services Gateway Components for Shipment
Follow these guidelines for packing and shipping individual components of the services
gateway:
Copyright © 2016, Juniper Networks, Inc.96
SRX340 Services Gateway Hardware Guide
To Next Page
Loading...
