K&R ACD320 Series User Manual

ACD320 user manual Appendix
- 145-
F7.21
Sleep detection
frequency
0～Maximum frequency 0 ○ 170
F7.22
Sleep detection
delay
0～999.9s 0 ○ 171
F7.23 Revival pressure 1～100 0 ○ 172
F7.24
Revival detection
delay
0～999.9s 0 ○ 173
F7.25
Water-lack detection
delay
0～999.9s 0 ○ 174
F7.28
Selection of
sleeping signal
0～2 0 ○ 177
2. Detailed description of the parameters
Function code Name Setting range Factory value
F0.08 Acce. Time 1 0.1～3600.0s 10.0s
F0.09 Dece. Time 1 0.1～3600.0s 10.0s
The acceleration and deceleration time at PID contol is set according to the actual situation.
Function code Name Setting range Factory
value
F3.05
Operation status display
parameter option
1～65535 1183
F3.06
Stop status display
parameter option
1～511 207
F3.07
Operation status display
preferential option.
0～15（0: It is invalid to
select preferentially）
0
F3.05=775 is set at PID control, (display the running frequency, setting frequency, output
current , PID provision, PID feedback value), F3.06=51 (display setting frequency, bus-bar
voltage, PID value, PID feedback value), F3.07=8 (display PID value preferential), the user can
set accordingly. The detailed explanation of parameters is refered in Chapter 6.
Function code Name Setting range Factory
value
F9.02 Acce. Time 3 0.1～3600.0s 445.0s
F9.03 Dece. Time 3 0.1～3600.0s 445.0s
The set of accelerating and decelerating time at PID control, this parameter is related to the
set of F4.26 and F7.26, as shown in the following instructions.

K&R ACD320 Series Specifications

General

Brand	K&R
Model	ACD320 Series
Category	Inverter
Language	English