KEB COMBIVERT F5 Reference Manual

255
DG - Diagnostics Parameters (Combivis only)
Value: Description:
172 Emergency Prole
173 Emergency Generator Speed
174 Earthquake Speed
175 Emergency Slowdown
180 Dropped Serial EN
200 No Communication to Encoder Card
201 Encoder Communication OK
202 Encoder Not Dened
206 No Communication to Encoder
207 Incremental Count Deviation
208 Encoder PPR does not match LE01
209 Interface ID is wrong
213 Encoder Overtemperature
214 Encoder Overspeed
215 Encoder Supply Voltage Too Low
216 Internal Encoder Error
217 Formatting Encoder
221 New Encoder Identied
222 Undened Encoder Error
223 Encoder Interface Busy

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)