13 Global menus and settings | 167
o CLASSIC
o SMOOTH
o AQUAMARINE
o FLAT
• VOICE MODE:
o SELECT 1:When you select a different voice family, the tone also changes
to select a tone from the target family.
o SELECT2: When you select a different family, the tone does not change
this time.
• FIND IP: Query the current IP address assigned to your instrument.
• WIFI: START/STOP SERVER. This button enables the wi-fi hotspot for remote control.
• ENCODING: Configure the character encoding for reading files (MIDI, MP3, etc.) from
the disk. The available encodings are Latin1 and UTF-8. It requires a restart to apply
the change.
• SEARCH MODE: This parameter controls the alphanumeric keypad:
o BEGINNING: it searches for the string only at the beginning of the
search term.
o ANY: it searches also halfway.
• DIAL SPEED: Determines the speed value of the selection knob (Dial). Values from 0 to
10.
• VOICE 2 MODE: This choice can be saved in the CUSTOM STARTUP.
o DEFAULT: VOICE 2 remains on, even if on page 1 of the Edit Voice the
VOICE 2 switch is OFF.
o DRIVEN ONLY BY VOICE 1: VOICE 2 is turned on or off depending on
how the VOICE 2 On/Off switch is set up on page 1 of the Edit Voice.
• NAVIGATION BAR: Option applied to changing voices and styles. If active, press the
front panel ENTER button to display, press EXIT to leave.
At the bottom of the screen there are the buttons: METRONOME, UPDATE BACKUP and
SAVE RESTART. Touch these to open the specific pages to grant you access to these various
functions:
METRONOME
This page is dedicated to managing the integrated metronome into the instrument.
To Next Page
Loading...
