Getting Started 1
Keysight U1253B User’s and Service Guide 43
(AC+DC current)
(With the positive probe inserted into the μA.mA
terminal)
DC mA
AC mA
AC+DC mA
% (0 mA to 20 mA or 4 mA to 20 mA
[a]
)
(Reading in mA or A is shown as secondary display)
(AC+DC current)
(With the positive probe inserted into the A terminal)
DC A
AC A
AC+DC A
Duty cycle (%)
Pulse width (ms)
Notes for selecting display with SHIFT button:
[a] Depends on the relevant setting in the Setup mode.
[b] Press for more than 1 second to return to AC V measurement only.
Table 1-7 Selecting display with the Shift button (continued)
Rotary switch position (Function) Primary display
To Next Page
Loading...
