Keysight ENA Series - Page 207

Keysight E5092A ENA Series Configurable Multiport Test Set 207
Post-Repair Procedures
Post-Repair Procedures
Switch 7 (SPDT
Switch Bias Pin
Adapter PCA)
(E5092-66504)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 7 (SPDT, 7COM,
7A and 7B)
- LED Check
- DCBUS Check
Switch 8 (SPDT
Switch Bias Pin
Adapter PCA)
(E5092-66504)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 8 (SPDT, 8COM,
8A and 8B)
- LED Check
- DCBUS Check
Switch 9 (SPDT
Switch Bias Pin
Adapter PCA)
(E5092-66504)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 9 (SPDT, 9COM,
9A and 9B)
- LED Check
- DCBUS Check
Switch 10 (SPDT
Switch Bias Pin
Adapter PCA)
(E5092-66504)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 10 (SPDT,
10COM, 10A and 10B)
- LED Check
- DCBUS Check
Table 6-1 Post-Repair Procedures
Replaced
Assembly or Part
Required
Adjustments
Correction Constants
(CC)
Verification