Keysight ENA Series - Page 208

208 Keysight E5092A ENA Series Configurable Multiport Test Set
Post-Repair Procedures
Post-Repair Procedures
6-
Switch 1 (SP4T
Switch Bias Pin
Adapter PCA)
(E5092-66505)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 1 (SP4T, Port1,
1A, 1B, 1C and 1D)
- LED Check
- DCBUS Check
Switch 2 (SP4T
Switch Bias Pin
Adapter PCA)
(E5092-66505)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 2 (SP4T, Port2,
2A, 2B, 2C and 2D)
- LED Check
- DCBUS Check
Switch 3 (SP4T
Switch Bias Pin
Adapter PCA)
(E5092-66505)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 3 (SP4T, Port3,
3A, 3B, 3C and 3D)
- LED Check
- DCBUS Check
Switch 4 (SP4T
Switch Bias Pin
Adapter PCA)
(E5092-66505)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 4 (SP4T, Port4,
4A, 4B, 4C and 4D)
- LED Check
- DCBUS Check
Table 6-1 Post-Repair Procedures
Replaced
Assembly or Part
Required
Adjustments
Correction Constants
(CC)
Verification