Keysight ENA Series - Page 209

Keysight E5092A ENA Series Configurable Multiport Test Set 209
Post-Repair Procedures
Post-Repair Procedures
Switch 5 (20GHz
SPDT Pin Switch
Module)
(P9397-60001)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 5 (SPDT, 5COM,
5A and 5B)
- LED Check
- DCBUS Check
Switch 6 (20GHz
SPDT Pin Switch
Module)
(P9397-60001)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 6 (SPDT, 6COM,
6A and 6B)
- LED Check
- DCBUS Check
Switch 7 (20GHz
SPDT Pin Switch
Module)
(P9397-60001)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 7 (SPDT, 7COM,
7A and 7B)
- LED Check
- DCBUS Check
Switch 8 (20GHz
SPDT Pin Switch
Module)
(P9397-60001)
No adjustment
needed
Perform the following performance tests.
- Write SN
- Load Match, Insertion Loss and
Isolation Test for Switch 8 (SPDT, 8COM,
8A and 8B)
- LED Check
- DCBUS Check
Table 6-1 Post-Repair Procedures
Replaced
Assembly or Part
Required
Adjustments
Correction Constants
(CC)
Verification