Kia Carnival - Recalling Memory Positions; Storing Memory Positions

Features of your vehicle
264
Driver Position Memory System
NOTICE
䳜 If the battery is disconnected, the
memory settings will be erased.
䳜 If the Driver Position Memory
System does not operate nor
-
mally, we recommend that you
have the system checked by an
authorised Kia dealer.
Storing memory positions
1. The ignition switch or ENGINE
START/STOP button is in the ON
position.
2. Adjust the driver's seat position,
outside rearview mirror position
and instrument panel illumination
intensity to the desired position.
3. Press the SET button. The system
will beep once and notify you
"Press button to save settings"on
the LCD display.
4. Press one of the memory buttons
(1 or 2) within 4 seconds. The
system will beep twice when the
memory has been successfully
stored.
5. "Settings 1 (or 2) saved" will
appear on the LCD display.
Recalling memory positions
1. The ignition switch or ENGINE
START/STOP button is in the ON
position.
2. Press the desired memory but
-
ton (1 or 2). The system will beep
once, and then the driver's seat
position, outside rearview mirror
position, instrument panel illumi
-
nation intensity and head-up dis
-
play height/brightness will
automatically adjust to the stored
positions.
3. "Settings 1 (or 2) applied" will
appear on the LCD display.
䳜 Whilst recalling the "1" memory
position, pressing the SET or 1
button temporarily stops the
adjustment of the recalled mem
-
ory position. Pressing the 2 but
-
ton recalls the "2" memory
position.
䳜 Whilst recalling the "2" memory
position, pressing the SET or 2
button temporarily stops the
adjustment of the recalled mem
-
ory position. Pressing the 1 but
-
ton recalls the "1" memory
position.