Driving your vehicle
1206
Safe Exit Warning (SEW)
warning volume to 'High', 'Medium'
or 'Low' for Safe Exit Warning.
If you change the warning volume,
the warning volume of other Driver
Assistance systems may change.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of Safe Exit Warning.
䳜 Even though 'Normal' is selected
for warning timing, if the vehicles
approaches at high speed from
the rear, the initial warning acti
-
vation time may seem late.
䳜 Select 'Late' for warning timing
when traffic is light.
If the engine is restarted, Warning
timing and Warning volume will
maintain the last setting.
Safe Exit Warning operation
Warning
Collision warning when exiting vehi
-
cle
䳜 When an approaching vehicle
from the rear is detected, the
'Watch (out) for traffic' warning
message will appear on the clus
-
ter, and an audible warning will
sound.
䳜 Safe Exit Warning will warn the
driver when your vehicle speed is
below 3 km/h (2 mph), and the
speed of the approaching vehicle
from the rear is above 6 km/h (3
mph).
Take the following precautions
when using Safe Exit Warning :
䳜 For your safety, change the Set
-
tings after parking the vehicle at a
safe location.