Maintenance
868
Light bulbs
7. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assem
-
bly and turn the socket clockwise.
8. Connect the rear back up lamp
connector.
9. Tighten the plastic retaining
screws.
10.Install the plastic tabs and the
under panel cover.
Replacing rear fog lamp (Bulb type)
If the rear fog lamp (1) does not
operate, have your vehicle checked
by a professional workshop. Kia rec
-
ommends to visit an authorised Kia
dealer/service partner.
Replacing high mounted stop lamp
(LED type)
If the high mounted stop lamp (LED)
(1) does not operate, have your
vehicle checked by a professional
workshop.
Kia recommends to visit an autho
-
rised Kia dealer/service partner.
The LED lamp cannot be replaced as
a single unit because it is an inte
-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the high mounted stop lamp
(LED), for it may damage related
parts of the vehicle.
To Next Page
Loading...
