Driving your vehicle
1486
Cruise Control (CC)
Off conditions
䳜 When the turn signal turns off,
the image on the instrument
cluster will turn off.
䳜 When the hazard warning flasher
is on, Blind-Spot View Monitor will
turn off, regardless of the turn
signal status.
䳜 When other important warning is
displayed on the instrument clus
-
ter, Blind-Spot View Monitor may
turn off.
Blind-Spot View Monitor malfunc
-
tion
When Blind-Spot View Monitor is
not working properly, or the cluster
display flickers, or the camera
image does not display normally,
have Blind-Spot View Monitor be
inspected by a professional work
-
shop. Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
If the camera lens is covered with
foreign material, Blind-Spot View
Monitor may not operate normally.
Always keep the camera lens clean.
However, do not use chemical sol
-
vents such as strong detergents
containing high alkaline or volatile
organic solvents (petrol, acetone
etc.). This may damage the camera
lens.
Cruise Control (CC) (if equipped)
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive
at speeds above 30 km/h (20 mph)
without depressing the accelerator
pedal.
Cruise Control operation
To set speed
1. Accelerate to the desired speed,
which must be more than 30 km/
h (20 mph).
To Next Page
Loading...
