Kia Carnival - Smart Cruise Control Operation

Driving your vehicle
1566
Smart Cruise Control (SCC)
Warning Volume
With the engine on, select 'Driver
Assistance → Warning Volume' from
the Settings menu to change the
Warning Volume 'High', 'Medium' or
'Low' for Smart Cruise Control.
NOTICE
䳜 If the engine is restarted, Warning
Volume will maintain the last set
-
ting.
䳜 If you change the Warning Vol
-
ume, the Warning Volume of
other Driver Assistance functions
may change.
Smart Cruise Control operation
Operating conditions
Smart Cruise Control will operate
when the following conditions are
satisfied.
Basic function
䳜 The gear is in D (Drive)
䳜 The driver's door is closed
䳜 EPB (Electronic Parking Brake) is
not applied
䳜 Your vehicle speed is within the
operating speed range
- When there is no vehicle in
front: 10~180 km/h (5~110
mph)
- when there is a vehicle in front:
0~180 km/h (0~110 mph)
䳜 ESC (Electronic Stability Control)
or ABS is on
䳜 ESC (Electronic Stability Control)
or ABS is not controlling the vehi
-
cle
䳜 Engine RPM is not in the red zone
䳜 Forward Collision-Avoidance
Assist brake control is not operat
-
ing
NOTICE
At a stop, if there is no vehicle in
front of your vehicle, the function
will turn on when the brake pedal is
depressed.
Overtaking Acceleration Assist
Overtaking Acceleration Assist will
operate when the turn signal lever is
pulled towards the driver whilst
Smart Cruise Control is operating.
Smart Cruise Control will operate
when the following conditions are
satisfied.
䳜 Your vehicle speed is above 60
km/h (40 mph)
OMQ4041606