Kia Carnival - Driver Position Memory System Reset; Easy Access Function

27
4
4
Features of your vehicle Driver Position Memory System
䳜 Whilst recalling the stored posi
-
tions, pressing one of the control
buttons for the driver's seat, out
-
side rearview mirror, or instru
-
ment panel illumination will cause
the movement of that component
to stop and move in the direction
that the control button is pressed.
Driver position memory system
reset
If the Driver position memory sys
-
tem does not work properly, initial
-
ize the system as follows.
How to initialize:
1. Stop the vehicle and open the
driver's door with the ignition
switch or ENGINE START/STOP
button in the ON position and the
vehicle shifted to P (Park).
2. Pull the driver's seat forward as
far as possible and have the seat
-
back upright as much as possible
using the driver's seat forward/
backward adjustment and seat
-
back angle (recline) switches.
3. Push the SET button and seat
forward movement switch for 2
seconds simultaneously.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will auto
-
matically move backwards. The
alarm sound will continue whilst
the system is in operation.
3. Initialization will be complete
after the seat and seatback move
to the centre with an alarm
sound. If, however, cases as fol
-
lows occur, the initialization pro
-
cess will come to a stop and the
alarm sound will stop as well.
䳜 When pushing driving position
memory system button
䳜 When pushing driver's seat height
adjustment switch
䳜 When shifting from P (Park) to
other positions
䳜 When driving speed exceeds 3
km/h
䳜 When the driver's door is closed
Easy access function
The system will move the driver's
seat automatically as follows:
Without smart key system
䳜 It will move the driver's seat rear
-
ward when the ignition key is
removed and the driver's door is
opened.
䳜 It will move the driver's seat for
-
ward when the ignition switch or
ENGINE START/STOP button is in
the ACC or ON position.
With smart key system
䳜 It will move the driver's seat rear
-
ward when the ENGINE START/
STOP button is in the OFF position
and the driver's door is opened.
䳜 It will move the driver's seat for
-
ward when the vehicle is turned