Driving your vehicle
406
Brake system
Automatic application of EPB
The EPB is applied automatically
under following conditions.
䳜 Shift to P (Park) on a slope
䳜 Engine OFF whilst AUTO HOLD is
enabled
䳜 When the vehicle moves a bit in P
(Park) position
䳜 Conditions below whilst AUTO
HOLD is activated
- Driver's door is opened
- Bonnet is opened
- Tailgate is opened
- Vehicle stops for more than
approximately 10 minutes on a
steep slope
䳜 Requested by other systems
For Electronic Parking Brake (EPB)
equipped vehicles with AUTO HOLD
function used whilst driving, if the
ENGINE START/STOP button has
been turned OFF, the EPB will be
engaged automatically. Therefore,
AUTO HOLD function should be
turned off before the ENGINE
START/STOP button is turned off.
EPB warning
The EPB will display a warning mes
-
sage with sound under certain con
-
ditions.
䳜 If you try to drive off whilst
engaging the accelerator pedal
with the EPB applied, but the EPB
doesn't release automatically, a
warning will sound and a message
will appear.
䳜 If the driver's seat belt is not fas
-
tened and the vehicle bonnet,
driver's door or tailgate is opened,
a warning will sound and a mes
-
sage will appear.
䳜 If there is a problem with the
vehicle, a warning may sound and
a message may appear.
If the above situation occurs, press
the brake pedal and release EPB by
pressing the EPB switch.