Kia Carnival - Automatic Stop and Reversal

33
4
4
Features of your vehicle Power sliding door
Automatic stop and reversal
If the power opening or closing is
blocked by an object or part of the
body, the power sliding door will
detect the resistance, then the
chime will sound 3 times, and stop
movement or move to the full open
position to allow the object to be
cleared. However, if the resistance is
weak such as an object that is thin
or soft, or the door is near latched
position, the automatic stop and
reversal may not detect the resis
-
tance and closing operation will con
-
tinue. Also, if the power sliding door
is forced by strong impact, the
automatic stop and reversal may
operate.
If the automatic stop and reversal
feature operates continuously more
than twice during one opening or
closing operation, the power sliding
door may stop at that position. At
this time, close the doors manually
and operate the door automatically
again.
NOTICE
䳜 In cold and wet climates, power
sliding doors and tailgate may not
work properly due to freezing
conditions.
䳜 When the sliding doors are
opened manually, more effort will
be required to open and close
than non-power sliding doors.
NOTICE
䳜 The power sliding door can be
operated when the engine is not
running. However the power
operation consumes large
amounts of vehicle electric power.
To prevent the battery from being
discharged, do not operate them
excessively.
䳜 To prevent the battery from being
discharged, do not leave the
power sliding door at open posi
-
tion for a long time.
䳜 Do not apply excessive force
whilst operating the power slid
-
ing door. This could cause damage
to the power sliding door.
䳜 When jacking up the vehicle to
change a tyre or repair the vehi
-
cle, do not operate the power
sliding door. This could cause the
power sliding door to operate
improperly.
OKA4040033