63
6
6
Driving your vehicle Forward Collision-Avoidance Assist (FCA) (Front
view camera only)
With the engine on, select 'Driver
Assistance → Warning Volume from
the Settings menu to change the
Warning Volume to 'High', 'Medium'
or 'Low' for Forward Collision-Avoid
-
ance Assist.
If you change the Warning Volume,
the warning volume of other Driver
Assistance functions may change.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of Forward Collision-
Avoidance Assist.
䳜 Even though 'Normal' is selected
for Warning Timing, if the front
vehicle suddenly stops, the initial
warning activation time may
seem late.
䳜 Select 'Late' for Warning Timing
when traffic is light and when
driving speed is slow.
䳜 If the engine is restarted, Warning
Timing and Warning Volume will
maintain the last setting.
䳜 If you change the Warning Vol
-
ume, the Warning Volume of
other Driver Assistance systems
may change.
Forward Collision-Avoidance Assist
operation
Warning and control
The basic function for Forward Colli
-
sion-Avoidance Assist is to warn and
control under the below circum
-
stances.
䳜 Collision Warning
䳜 Emergency Braking
䳜 Stopping vehicle and ending
Collision warning
To warn the driver of a collision, the
warning message will appear on the
cluster, an audible warning will
sound.
Collision Warning is operated under
the below circumstances.
䳜 The speed of your vehicle:
approximately 10~180 km/h
(6~110 mph)
䳜 Pedestrian and cyclist: When the
speed of your vehicle is approxi
-
mately 10~60 km (6~37 mph)