99
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Warning (BCW)
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Blind-Spot Colli
-
sion-Avoidance Warning.
䳜 Even though 'Normal' is selected
for Warning Timing, if the vehicles
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 'Late' for Warning Timing
when traffic is light and when
driving speed is slow.
Blind-Spot Collision-Avoidance
Warning operation
Warning
Blind-Spot Collision-Avoidance
Warning will warn and control as
following operation.
䳜 Vehicle detection
䳜 Collision warning
Vehicle detection
䳜 Warning light will appear in the
outside rearview mirror.
Blind-Spot Collision-Avoidance
Warning will operate as following
circumstances.
䳜 Vehicle speed: Above 20 km/h (12
mph)
䳜 The speed of the vehicle in the
blind spot area: Above 10 km/h (7
mph)
Collision warning
Collision warning will operate when
the turn signal to change the lane in
the direction of the vehicle in the
blind spot area.
䳜 To warn the driver of a collision,
the warning light on the side view
mirror will blink. At the same
time, an audible warning will
sound.
䳜 When the turn signal is turned off
or you move away from the lane,
the collision warning will be can
-
celed and the function will return
to vehicle detection state.
If collision warning is selected in the
Blind-Spot Safety setting, collision
warning will be activated even if you
approach the lane in the direction of
the vehicle in the blind spot side.