Kia Carnival - Heated Steering Wheel

75
4
4
Features of your vehicle Steering wheel
1. To change the steering wheel
angle, pull down the lock release
lever (1).
2. Adjust the steering wheel to the
desired angle (2) and height (3).
Move the steering wheel, so it
points toward your chest, not
toward your face. Make sure you
can see the instrument panel
warning lights and gauges. After
adjusting, pull up the lock.
3. Pull up the lock-release lever to
lock the steering wheel in place.
Push the steering wheel both up
and down to be certain it is locked
in position.
4. Be sure to adjust the steering
wheel to the desired position
before driving.
NOTICE
After adjustment, sometimes the
lock-release lever may not lock the
steering wheel.
It is not a malfunction. This occurs
when two gears engage. In this
case, adjust the steering wheel
again and then lock the steering
wheel.
Heated steering wheel (if equipped)
When the ignition switch or ENGINE
START/STOP button is in the ON
position, pressing the heated steer
-
ing wheel button warms the steer
-
ing wheel. The indicator on the
button will illuminate.
To turn the heated steering wheel
off, press the button once again.
The indicator on the button will turn
off.
䳜 The heated steering wheel
defaults to the OFF position
whenever the ignition switch or
ENGINE START/STOP button is in
the ON position. However, if the
Auto Comfort Control function is
ON, the heated steering wheel will
turn on and off depending on the
outside temperature.
䳜 Auto Comfort Control (for driver's
seat) (if equipped)
The heated steering wheel auto
-
matically controls the steering
wheel temperature depending on
the ambient temperature when
the engine is running. If the
heated steering wheel switch is
pushed, the heated steering
wheel will have to be controlled
manually.
To use this function, it must be
activated from the Settings menu
OKA4041063R