171
6
6
Driving your vehicle Navigation-based Smart Cruise Control (NSCC)
the brake pedal, press the ( )
switch to restart the function.
䳜 Highway Set Speed Auto Change
function does not operate on
highway interchanges or junc
-
tions.
䳜 Highway Set Speed Auto Change
function only operates based on
the speed limits of the highway
(or motorway), it does not work
with the speed cameras.
䳜 When Highway Set Speed Auto
Change function is operating, the
vehicle automatically accelerates
or decelerates when the highway
(or motorway) speed limit
changes.
䳜 The maximum set speed for
Highway Set Speed Auto Change
function is 140 km/h (90 mph).
䳜 If the speed limit of a new road is
not updated in the navigation,
Highway Set Speed Auto Change
function may not operate prop
-
erly.
䳜 If the speed unit is set to a unit
other than the speed unit used in
your country, Highway Set Speed
Auto Change function may not
operate properly.
The images or colours may be dis
-
played differently depending on the
specifications of the instrument
panel or theme.
Navigation-based Smart Cruise
Control limitations
Navigation-based Smart Cruise
Control may not operate normally
under the following circumstances:
䳜 The navigation is not working
properly
䳜 Map information is not transmit
-
ted due to infotainment system's
abnormal operation
䳜 Speed limit and road information
in the navigation is not updated
䳜 The map information and the
actual road is different because of
real-time GPS data or map infor
-
mation error
䳜 The navigation searches for a
route whilst driving
䳜 GPS signals are blocked in areas
such as a tunnel
䳜 A road that divides into two or
more roads and joins again
䳜 The driver goes off course the
route set in the navigation
䳜 The route to the destination is
changed or canceled by resetting
the navigation
䳜 The vehicle enters a service sta
-
tion or rest area
䳜 Android Auto or Car Play is oper
-
ating
䳜 The navigation cannot detect the
current vehicle position (ex: ele
-
vated roads including overpass
To Next Page
Loading...
