125
4
4
Features of your vehicle Warning and indicator lights
High Beam Assist indicator light
(if equipped)
This indicator light illuminates:
䳜 When the high beam is on with
the light switch in the AUTO light
position.
䳜 If your vehicle detects oncoming
or preceding vehicles, High Beam
Assist will switch the high beam
to low beam automatically.
* For more details, refer to "High
Beam Assist (HBA) (if equipped)"
on page 4-150.
Light ON indicator light
This indicator light illuminates:
䳜 When the tail lights or headlights
are on.
Front fog indicator light (if
equipped)
This indicator light illuminates:
䳜 When the front fog lights are on.
Rear fog indicator light (if
equipped)
This indicator light illuminates:
䳜 When the rear fog lights are on.
Glow indicator light (Diesel engine)
This indicator light illuminates:
䳜 When the engine is being pre
-
heated with the ignition switch or
ENGINE START/STOP button in
the ON position.
- The engine can be started after
the glow indicator light goes
off.
- The illumination time varies
with the engine coolant tem
-
perature, air temperature, and
battery condition.
If the indicator light remains on or
blinks after the engine has warmed
up or whilst driving, there may a
malfunction with the engine pre
-
heating system.
In this case, have the vehicle
inspected by a professional work
-
shop. Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
Engine preheating
If the engine does not start within
10 seconds after the preheating is
completed, set the ignition switch or
ENGINE START/STOP button to the
LOCK or OFF position for 10 seconds
and then to the ON position in order
to preheat the engine again.