147
4
4
Features of your vehicle Lighting
equipped), tail, license light will turn
ON.
Auxiliary lamp will be ON only in
position lamp condition.
Head light (Low Beam)
When the light switch is in the head
light position, head light (low beam),
tail, license light will turn ON.
The ignition switch or ENGINE
START/STOP button must be in the
ON position to turn on the head
-
lights.
Auto light
When the light switch is in the AUTO
light position, the taillights and
headlights will turn ON or OFF auto
-
matically depending on the amount
of light outside the vehicle.
䳜 Never place anything over the
sensor (1) located on the instru
-
ment panel as this will ensure
better auto-light system control.
䳜 Don't clean the sensor using a
window cleaner, the cleaner may
leave a light film which could
interfere with sensor operation.
䳜 If your vehicle has window tint or
other types of metallic coating on
the front windscreen, the Auto
light system may not work prop
-
erly.
To Next Page
