Features of your vehicle
1524
Lighting
- If the headlamp lever is pulled
towards you when the high
beam is on by High Beam
Assist, low beam will be on and
the function will turn off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and
the corresponding lamp will
turn on.
䳜 When High Beam Assist is operat
-
ing, high beam switches to low
beam if any of the following con
-
ditions occur:
- When the headlamp of an
oncoming vehicle is detected.
- When the tail lamp of a vehicle
in front is detected.
- When the headlamp or tail lamp
of a motorcycle or a bicycle is
detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other
lights are detected.
Malfunction and Limitations
Malfunction
When High Beam Assist is not work
-
ing properly, the 'Check HBA (High
Beat Assist) system' warning mes
-
sage will appear and warning light
( ) will illuminate on the cluster.
We recommend that the function be
inspected by an authorised Kia
dealer/service partner.
Limitations
High Beam Assist may not work
properly in the following situations:
䳜 Light from a vehicle is not
detected because of lamp dam
-
age, or because it is hidden from
sight, etc.
䳜 Headlamp of a vehicle is covered
with dust, snow or water.
䳜 A vehicle's headlamps are off but
the fog lamps are on and etc.
䳜 There is a lamp that has a similar
shape as a vehicle's lamp.
To Next Page
Loading...
