Driving your vehicle
506
Brake system
When operating
When the ESC is in operation,
the ESC indicator light blinks.
When the Electronic Stability
Control is operating properly, you
can feel a slight pulsation in the
vehicle. This is only the effect of
brake control and indicates nothing
unusual.
When moving out of the mud or
driving on a slippery road, pressing
the accelerator pedal may not cause
the vehicle rpm (revolutions per
minute) to increase.
ESC operation off
This vehicle has 2 kinds of ESC
off states.
If the vehicle stops when ESC
is off, ESC remains off. Upon
restarting the vehicle, the ESC will
automatically turn on again.
ESC off state 1
To turn off the traction control
function and only operate the brake
control function of the ESC, press
the ESC OFF button (ESC OFF )
for less than 3 seconds and the ESC
OFF indicator light (ESC OFF ) will
illuminate.
ESC off state 2
To turn off the traction control
function and the brake control func
-
tion of the ESC, press the ESC OFF
button (ESC OFF ) for more than
3 seconds. ESC OFF indicator light
(ESC OFF ) will illuminate and ESC
OFF warning chime will sound. At
this state, the vehicle stability con
-
trol function does not operate any
more.
To Next Page
