77
6
6
Driving your vehicle Forward Collision-Avoidance Assist (FCA)
(Sensor fusion)
Warning Volume
With the engine on, select 'Driver
Assistance → Warning Volume' from
the Settings menu to change the
Warning Volume to 'High', 'Medium'
or 'Low' for Forward Collision-Avoid
-
ance Assist.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of Forward Collision-
Avoidance Assist.
䳜 Even though 'Normal' is selected
for Warning Timing, if the front
vehicle suddenly stops, the initial
warning activation time may
seem late.
䳜 Select 'Late' for Warning Timing
when traffic is light and when
driving speed is slow.
䳜 If the engine is restarted, Warning
Timing and Warning Volume will
maintain the last setting.
䳜 If you change the Warning Vol
-
ume, the warning volume of other
Driver Assistance functions may
change.
Forward Collision-Avoidance Assist
operation
Basic function
Warning and control
The basic function for Forward Colli
-
sion- Avoidance Assist is warned
and controlled by the following level.
䳜 Collision Warning
䳜 Emergency Braking
䳜 Stopping vehicle and ending brake
control
Collision warning
To Next Page
