97
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Warning (BCW)
䳜 Never disassemble the rear corner
radar or radar assembly, or apply
any impact on it.
䳜 If there is impact on the rear cor
-
ner radar or near the radar, even
though the warning message
does not appear on the cluster,
Blind-Spot Collision-Avoidance
Warning may not operate prop
-
erly. Have the function be
inspected by a professional work
-
shop. Kia recommends to visit an
authorised Kia dealer/service
partner.
䳜 If the rear corner radars have
been replaced or repaired, have
the vehicle inspected by a profes
-
sional workshop. Kia recom
-
mends to visit an authorised Kia
dealer/service partner.
䳜 Use only genuine parts to repair
the rear bumper where the rear
corner radar is located.
䳜 Do not apply license plate frame
or objects, such as a film, acces
-
sories, molding and sticker or a
bumper painting near the rear
corner radar.
䳜 The function may not work prop
-
erly if the bumper has been
replaced, or the surroundings of
the rear corner radar has been
damaged or paint has been
applied.
䳜 If a trailer, carrier or other equip
-
ments is installed, it may
adversely affect the perfor
-
mance of the rear corner radar or
the function may not operate.
Blind-Spot Collision-Avoidance
Warning settings
Setting features
Blind-Spot Safety
With the engine on, select or dese
-
lect 'Driver Assistance → Blind-Spot
Safety' from the Settings menu to
set whether or not to use each
function.
䳜 Warning Only: Blind-Spot Colli
-
sion-Avoidance Warning will warn
the driver with audible warning
will be applied depending on the
collision risk levels. Braking will
not be assisted, so driver operate
the vehicle directly.
䳜 Off: Blind-Spot Collision-Avoid
-
ance Warning will turn off.
To Next Page
Loading...
